Specifications

37
PNA-X Network Analyzers
PNA-X Configuration Information
Description Additional information
Pulse, antenna, mm-wave
Option 008 Pulsed-RF measurements Requires Option 025
Option 020 Add IF inputs for antenna and mm-wave
Option 021 Add pulse modulator to internal 1st source
Option 022 Add pulse modulator tointernal 2nd source Requires Option 224 or 400
Option 025 Add four internal pulsegenerators
Option 118 Fast CW sweep
Accessories
Option 1CM Rack mount kit for use without handles
Option 1CP Rack mount kit for use with handles
Calibration software
Option 897
1
Perpetual license for built-in performance test software
forAgilent inclusive calibration
Option 898
1
Perpetual license for built-in performance test software
for standards compliant calibration
Calibration documentation
Option 1A7 ISO 17025 compliant calibration
Option UK6 Commercial calibration certificate with test data
Option A6J ANSI Z540 compliant calibration
Additional Information
Download the latest PNA-X application notes:
Bookmark this page to download the latest PNA-X application
notes to gain in-depth measurement knowledge.
Get answers online from factory experts:
Discuss calibration, applications, product, and programming topics
at Agilent’s online network analyzer discussion forum. Get answers
to your toughest measurement and design challenges and browse
prior discussion topics.
www.agilent.com/find/na_forumwww.agilent.com/find/pnaxapps
Available options, continued
1. Additional hardware required. Please refer to the analyzer’s Service Guide for required service test equipment.