User`s guide

PRINTER SETUP
Set Colr Printer
Set B&W Printer
HP B&W PRINTER
HP B&W DJ540
EP MX80 SML LRG
EP Lq570 SML LRG
PRT MENU ON OFF
COPY DEV PRNT PLT
IcoPv]
Press this key to send a PRINTER RESET command to the printer.
This will cause a form feed if any data has been sent to the printer
since the last form feed.
Press if connected to a Hewlett-Packard compatible color printer,
then select the appropriate printer.
Selecting any Hewlett-Packard printer results in three printouts per
page. After three printouts the page will be in position to start again
at the top of the page if the printer’s perforation skip is OFF (see
Figure 6-l).
One printout per page can be achieved by manually formfitting each
printout.
Press this key to print in black and white, then select appropriate
printer mode.
Press this key if the spectrum analyzer is connected to a
Hewlett-Packard compatible printer.
Selecting any Hewlett-Packard printer results in three printouts per
page. After three printouts the page will be in position to start again
at the top of the page if the printer’s perforation skip is OFF (see
Figure 6-l).
One printout per page can be achieved by manually formfitting each
printout.
Press this key if the spectrum analyzer is connected to a
Hewlett-Packard DeskJet 540 printer.
Press this key if the spectrum analyzer is connected to a MX-80
Epson or other compatible g-pin print-head printer.
Pressing this key to underline SML will allow two printouts per page
and will print softkey labels if desired (see PRT MENU ON OFF ).
Pressing this key to underline LRG will allow only one printout per
page and will not print the softkey labels.
Press this key if the spectrum analyzer is connected to a LQ-570
Epson or other compatible 24-pin print-head printer.
Pressing this key to underline SML will allow two printouts to a page
and will print softkey labels if desired (see PRT MENU ON OFF ).
Pressing this key to underline LRG will allow only one printout per
page and will not print the softkey labels.
Press this key so that ON is underlined to print the softkey labels
with the spectrum analyzer printout.
This function is operational for Epson compatible printers only when
SML is underlined.
Press this key so PRNT is underlined.
Press this key to copy the spectrum analyzer display to the printer.
6-6 Printing and Plotting