User`s guide
The on event programming commands can be set remotely; see the HP8590
E-Series and L-Series Spectrum Analyzer and HP 8591C Cable TV Analyzer
Programmer’s Guide for more information about setting the commands.
When the on event programming commands have not been set, or when an
instrument preset has been performed, pressing CATALOG
ON
EVENT displays
the status of the on event programming commands as UNDEFINED. If the
ONEOS, ONSWP, TRMATH, ONMKR, ONPWRUP, and ONSRQ commands have
been set, pressing CATALOG ON EVENT displays their status as ACTIVE. When
ONCYCLE,
ONDELAY,
or
ONTIME
have been set, pressing CATALOG ON EVENT
displays the information in
Table
7-5 (see Figure 7-3).
‘Ihble
7-5. CATALOG ON EVENT Display Description
Programming
Command
Description of CATALOG ON EVENT Display
ONCYCLE
The number of seconds left until the event occurs, followed by the number
of seconds ONCYCLE was set for.
ONDELAY
CATALOG ON EVENT displays either a positive number or negative number
of seconds.
A
positive number indicates the number of seconds left until tht
event occurs. A negative number indicates the number of seconds that has
passed since the event occurred.
ONTIME
The date (in year, month, and day format) and the time (in 24 hour format)
that ONTIME is set for.
Front-Panel Key Access:
[wj
or
m
&
REF
.B
dGm
ATTEN
IB
dB
PEAK
LOG
‘dH..‘SVei’i’S.i
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
w
UNDEFINED
UNDEFINED
TRMATH UNDEFINED
ONCYCLE
IN 86244 SEC ON CYCLE
ONOELAY IN -125 SEC
ONMKR ACTIVE
ONSRQ
UNDEFINED
ONTINE
AT OATE
961881
AT TIME
OF 86400
89:ao:EE
DELETE
FILE
“’
:
SELECT
.'
'.
:
:
'.'
$,q
$8
"
PREFX
SC FC
CORR
,.,......;
..I.....~~~~~I~~~~~~.....~~~~~~~......~~~~~~~~.....,,,,,,.,..,........,,,,,..,,,,,,,,,,,
EXIT
:
CIITALOG
'.
"
:
PREU
CENTEd"l';ZB"GHr
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SPAN"I.;80B"GH-z
MENU
RES
GW
3.8 MHz
UBW 1 MHz
SWP
28
m5ec
RT
Figure 7-3. CATALOG ON EVENT Display
CATALOG
PREFIX
catalogs all of the saved data, that has the specified prefix, that is either on the
memory card or in spectrum analyzer memory. The entire prefix does not have
to be specified. For example, if you want to catalog all the files beginning with
the prefix S, specify S as the prefix and then use CATALOG PREFIX . Prefixed
items can be saved in spectrum analyzer memory by either loading in from a
memory card or using remote programming commands to define them.
Front-Panel Key Access:
[ml
or
m
720
Key Descriptions