User`s guide

CLEAR

WRITE A

erases any data previously stored in trace A and continuously displays any

signals during the sweep of the spectrum analyzer. This function is activated at

power on and by pressing

@ZZ7J.

Changing the trace mode of trace C to clear write or minimum hold can change

the trace mode of trace A. If trace A is in clear-write mode or maximum-hold

mode when trace C is changed to clear write or minimum hold, the trace mode

of trace A is changed to store blank. The following table shows the trace mode

of trace A before and after changing trace C to clear-write or minimum-hold

trace mode.

Trace Mode of Trace A Trace Mode of Trace A

Changing the trace mode of trace A to clear write or maximum hold can

change the trace mode of trace C. If trace C is in clear-write mode when trace

A is changed to clear write or minimum hold, the trace mode of trace C is

changed to minimum hold.

Trace Mode of Trace C Trace Mode of Trace C

Front-Panel Key Access:

CTRACE)

7-24 Key Descriptions