User`s guide
DESKJET
310/55oc
DESKJET 540
DETECTOR
PK SP NG
DETECTOR
SMP PK
piFiT-
DISPLAY
CAL DATA
selects the HP DeskJet 310 or
55OC
for color printing. Use this function if you
have one of these color printers. This
softkey
can be accessed by pressing
(-1,
then Set Colr Printer.
Front-Panel Key Access:
(@iGQ
selects the HP DeskJet 540 for color printing. Use this function if you have
this color printer. This
softkey
can be accessed by pressing
(-1,
then
Set Colr Printer.
Front-Panel Key Access:
(wj
Option 101 only.
selects between positive peak, sample, and negative peak detection. Negative
peak detection is only available with option 101. When sample detection is
selected, SMPL appears in the upper-left corner of the screen. In sample mode,
the instantaneous signal value at the present display point is placed in memory.
Sample detection is activated automatically for noise level markers, during
video averaging, and for FFT measurements.
When positive peak detection is selected, PEAK appears in the upper-left
corner of the screen. Positive peak detection obtains the maximum video
signal between the last display point and the present display point and stores
this value in the trace memory address. Positive peak detection is selected at
power on and by pressing (PRESET].
Negative peak detection functions the same as positive peak detection but
selects the minimum video signal. The PEAK message does not appear in the
upper-left corner of the screen.
Front-Panel Key Access:
(ml
selects between positive peak detection and sample detection. When sample
detection is selected, SMPL appears in the upper-left corner of the screen. In
sample mode, the instantaneous signal value at the present display point is
placed in memory. Sample detection is activated automatically for noise level
markers, during video averaging, and for FFT measurements.
When positive peak detection is selected, PEAK appears in the upper-left
corner of the screen. Positive peak detection obtains the maximum video
signal between the last display point and the present display point and stores
this value in the trace memory address. Positive peak detection is selected at
power on and by pressing
(PRESET].
Front-Panel Key Access:
(TRACE]
accesses
softkeys
that include the HOLD key and limit line menus, and activate
the display line, threshold and analog+ display mode. They allow title and
prefix entry, and control the display of the graticule and screen annotation.
displays the current correction-factor data generated by the frequency and
amplitude self-calibration routines. This is a service diagnostic function and is
for service use only.
Front-Panel Key Access:
a
7-34 Key Descriptions