User`s guide
ERASE
TRACEALL
allows you to purge all the user trace registers 0 through TRCMEM. Pressing
Dispose User Mem and then pressing ERASE
TRACEALL
causes a message to
appear on the spectrum analyzer screen: If you are sure, Press key again
to purge data. Press ERASE
TRACEALL
again if you want to dispose of the
user trace registers. Press any other
softkey
if you do not want to dispose of
user state registers.
Note
n If SAVE LOCK
OM
OFF is set to (ON), this function is disabled.
. Use DELETE FILE to selectively delete stored programs or variables from
spectrum analyzer memory.
Front-Panel Key Access:
C-1
EP Lq570
SML LRG
sets the spectrum analyzer to be compatible with an Epson LQ-570 compatible
printer. Press Set B&W Printer then EP
LlJ570
SML LRG
until LRG is
underlined to set up the large screen printout. This will allow for one printout
per page. The large screen printout format will not allow for printing of the
menu keys. Press Set B&W Printer then EP
Lq570
SML LRG
until SML
is underlined to set up the small screen printout. This will allow for two
printouts per page.
Front-Panel Key Access:
[CONFIG)
EP MX80
SML
LRG
EXECUTE
TITLE
EXIT
Exit
Cat
alog
sets the spectrum analyzer to be compatible with an Epson MX80 compatible
printer. Press Set
B&W
Printer then EP MX80 SML LRG until LRG is
underlined to set up the large screen printout. This will allow for one printout
per page. The large screen printout format will not allow for printing of the
menu keys. Press Set B&W Printer then EP MX80 SML LRG until SML
is underlined to set up the small screen printout. This will allow for two
printouts per page.
Front-Panel Key Access:
[CONFIG]
executes a programming command displayed in the screen title area of
the spectrum analyzer. The Change Title function can be used to print
programming commands in the screen title area of the display. The commands
can then be executed from the front panel of the spectrum analyzer, without
an external computer, by pressing the EXECUTE TITLE
softkey.
Front-Panel Key Access: (CAL)
exits the EDIT FLATNESS
softkey
menu. This is a service calibration function
and is designed for service use only.
Front-Panel Key Access:
ICALl
returns the spectrum analyzer to the state it was in before the current catalog
function was invoked. It clears the catalog display and returns to a normal
spectrum analyzer display.
Front-Panel Key Access:
&ZZiJ
or
m
Key Descriptions 7-41