User`s guide

GRPH MKR
ON OFF
turns the graph marker ON or OFF. This softkey is available when ACPGRAPH
is ON (for ACP or ACP extended measurements), or when PWRGRAPH is ON
(for channel power measurements). For the ACPGRAPH, the delta frequency,
ACP ratio, and channel power are displayed at the marker position. For the
channel power graph, the frequency and channel power are displayed at the
marker position.
Front-Panel Access Key: fjMEAS/USER_J
IHOLD)
HOLD
HP B&W
D 5540
HP B&W
PRINTER
HP 859OL, HP 85921; and HP 8594L only.
deactivates the active function and blanks the active function text from the
display. No data can be accidentally entered using the knob, step keys, or
keypad. Activating another function will turn off the hold function. The HOLD
softkey can also be accessed by pressing the cm] key.
deactivates the active function and blanks the active function text from the
display. No data can be accidentally entered using the knob, step keys, or
keypad. Activating another function will turn off the hold function.
Front-Panel Key Access: (m)
Option 041 or 043 only.
selects a black and white printer. Use this function if you have a black and
white HP DeskJet 540 printer. Press Set B&W Printer and then select the
HP B&W PRINTER softkey. Start printing by pressing COPY DEV PRNT PLT
(PRNT) and Icopvl.
Front-Panel Key Access: @%iZ]
Option 041 or 043 only.
selects a black and white printer. Use this function if you have a black
and white HP printer, or if you are using a color printer, but want to have
a black and white print. Press Set B&W Printer and then select the
HP B&W PRINTER softkey. Start printing by pressing COPY DEV PRNT PLT
(PRNT) and Icopvl.
Front-Panel Key Access: (m]
IDNUM
is used when the instrument is powered on the first time. It inputs the
spectrum analyzer model number and option information. This is a service
calibration function and is for service use only. Refer to the service guide for
more information.
Front-Panel Key Access: ICAL)
INIT FLT
is used when the instrument is powered on the first time. It sets the defaults
for spectrum analyzer flatness including the start and stop frequencies and
the step size. All of the correction values are set to zero. This is a service
calibration function and is for service use only. Refer to the service guide for
more information.
Front-Panel Key Access: (CAL)
7-48 Key Descriptions