User`s guide

Improved Amplitude Accuracy for NADC bands (Option 050)
For HP 8591E, HP 8593E, HP 8594E, HP 8595E, and HP 8596E only. This is an amplitude
calibration that improves specifications to l 0.6dB at 20-30” C for NADC frequency bands 824
to 849 MHz and 869 to 894 MHz. In addition, it improves specifications to 50.9dB at 20-30” C
in the frequency bands 1850 to 1910 MHz and 1930 to 1990 MHz
Option 050 is also available as a service center only retrofit kit (Option R50) after the purchase
of your spectrum analyzer.
Improved Amplitude Accuracy for PDC bands (Option 051)
For HP 8591E, HP 8593E, HP 8594E, HP 8595E, and HP 8596E only. This is an amplitude
calibration that improves specifications to f0.5 dB at 20-30” C for the PDC frequency bands in
the 810 to 956 MHz and 1429 to 1501 MHz frequency ranges.
Option 051 is also available as a service center only retrofit kit (Option R51) after the purchase
of your spectrum analyzer.
Improved Amplitude Accuracy for PHS (Option 052)
Fbr HP 8593E, HP 8594E, HP 8595E, and HP 8596E only. This is an amplitude calibration that
improves specifications to f0.5 dB at 20-30° C for the PHS frequency band in the 1895 to 1918
MHz frequency range.
Option 052 is also available as a service center only retrofit kit (Option R52) after the purchase
of your spectrum analyzer.
Improved Amplitude Accuracy for CDMA (Option 053)
For HP 8591E, HP 8593E, HP 8594E, HP 8595E, and HP 8596E only. This is an amplitude
calibration that improves specifications to *0.6 dB at 20-30” C for CDMA frequency bands 824
to 849 MHz and 869 to 894 MHz. In addition, it improves specifications to fO.SdB at 20-30” C
in the frequency bands 1850 to 1910 MHz and 1930 to 1990 MHz
Option 053 is also available as a service center only retrofit kit (Option R53) after the purchase
of your spectrum analyzer.
Fast Time Domain Sweeps (Option 101)
For HP 8591E, HP 8593E, HP 8594E, HP 8595E, and HP 85963 only. Option 101 allows sweep
times down to 20 ps in zero span. In fast sweep times (sweep times less than 20 ms), time
domain sweeps are digitized. All trace functions are available for these fast zero-span sweeps.
Also see Option 301 below.
Option 101 also adds the analog+ display mode and negative peak detection to the spectrum
analyzer. The analog+ display mode provides traditional analog display operation combined
with the advantages of digital display features like markers, screen titles, and hard copy
output. The negative peak detector capability is useful for video modulator balance
adjustments and intermodulation distortion measurements.
Option 101 is also available as a retrofit kit (Option ROl) after the purchase of your spectrum
analyzer, or as a kit HP part number 5062-6458.
10-8
Measurement Personalities, Options, and Accessories