User`s guide

1-60 Chapter1
System Verification and Performance Tests
Performance Tests
4. When the analyzer displays the message POWER METER
CALIBRATION IS DONE, connect the equipment as shown in
Figure 1-23.
Figure 1-23 Port 1 Input Frequency Response Test Setup
Port 1 Input Frequency Response from 300 kHz to 3 GHz
1. Press Meas, INPUT PORTS, A.
2. Press Marker, MARKER 1, Marker Search, SEARCH:MIN.
3. Press Marker, Marker 2, Marker Search, SEARCH:MAX.
4. Write the marker 1 or marker 2 reading, whichever has the larger
absolute magnitude, on the performance test record.