User`s guide

Chapter 1 1-71
System Verification and Performance Tests
Performance Tests
13. Press Chan 1, Scale Ref, SCALE/DIV, 5, x1, REFERENCE VALUE, –100, x1.
Port Crosstalk (Port 1 and Port 3)
1. Connect the equipment as shown in Figure 1-32.
Figure 1-32 Port Crosstalk Test Setup
2. Press Preset, Power, 10, x1.
3. Press Avg, IF BW, 10, x1.
Crosstalk to Port 3 from 300 kHz to 3 GHz
1. Press Start, 300, k/m, Stop, 3, G/n.
2. Press Meas, Trans: FWD S31 (B/R).
3. Press Scale Ref, REFERENCE VALUE, –100, x1.
4. Press Sweep Setup, TRIGGER MENU, SINGLE.
5. Wait until the trace has settled.
6. Press
Marker Search, SEARCH:MAX.
7. Write the marker value that appears on the analyzer display on the
performance test record.