User`s guide

Chapter 1 1-77
System Verification and Performance Tests
Performance Tests
12.Press Scale Ref, SCALE/DIV, 5, x1, REFERENCE VALUE, –100, x1.
13.Press Chan 1, Scale Ref, SCALE/DIV, 5, x1, REFERENCE VALUE, –100, x1.
Port Crosstalk (Port 1 and Port 2)
1. Connect the equipment as shown in Figure 1-36.
Figure 1-36 Port Crosstalk Setup, Port 1 and Port 2
2. Press Preset, Power, 10, x1.
3. Press Avg, IF BW, 10, x1.
Crosstalk to Port 2 from 300 kHz to 3 GHz
1. Press Start, 300, k/m, Stop, 3, G/n.
2. Press Meas, Select Ports [1–2], Trans: FWD S21 (B/R).
3. Press Scale Ref, REFERENCE VALUE, –100, x1.
4. Press Sweep Setup, TRIGGER MENU, SINGLE.
5. Wait until the trace has settled.
6. Press Marker Fctn, MARKER SEARCH, SEARCH:MAX.
7. Write the marker value that appears on the analyzer display on the
performance test record.