User`s guide

2-6 Chapter2
Operation
Operation
Measure Menu Map
Once the 3 PORT mode is turned on, control of the port states can be done
through the Meas front panel key. Press the SELECT PORTS key to toggle
between selections “PORT 1-3”, “PORT 2-3”, and “PORT 1-2”. At Preset
or instrument turn on, the default state for selected ports is “PORT 1-3”.
The Preset default can be overwritten by creating a user preset. See the
standard documentation for details.
Figure 2-3 shows the Meas key menu map with the 3 PORT mode turned
on. When the 3 3 PORT mode is turned off, the SELECT PORTS key is
deactivated. The Meas key menu now functions the same as a standard
analyzer.
Figure 2-3 Meas Key Menu Map