User`s guide

Chapter 1 1-135
System Verification and Performance Tests
Performance Tests
Instrument Setup
1. Zero and calibrate the power meter.
2. Set up the equipment as shown in Figure 1-61. For the type-N cable,
use the one added in step 4 on the previous page.
3. On the analyzer:
Press Preset, Avg, IF BW, 1, k/m, Meas, INPUT PORTS, B.
Press Scale Ref, SCALE/DIV, 1, x1.
Press Marker Fctn, MARKER MODE MENU, STATS ON.
4. On the external source, set the power level for 6 dBm.
Figure 1-61 Harmonic Measurement Accuracy Test Setup