User`s guide

Chapter 2 2-11
Operation
Operation
With the coupled channels off and the quad-channel display on, the
analyzer should show the corrected response for four of the nine
S-parameters. The measurement S-parameter values are shown below:
NOTE These examples may be saved in an instrument state and recalled later.
The port settings are also saved in the instrument state.
Save the instrument state by pressing Save/Recall, SAVE STATE or
RE-SAVE STATE.
Channel 1, 3 Channel 2, 4
S
11
Port 1 Refl. S
22
Port 2 Refl.
S
31
Port 1- Port 3 FWD Trans S
32
Port 2 - Port 3 FWD Trans
S
13
Port 1 - Port 3 REV Trans S
23
Port 2 - Port 3 REV Trans
S
33
Port 3 Refl. S
33
Port 3 Refl.