User`s guide

Chapter 2 2-17
Operation
Operation
8. Press Seq, TTL I/O, TTL OUT, TESTSET I/O FWD, 6, x1, TESTSET I/O REV, 6,
x1
.
9. Press Meas, Trans: REV S21 B/R.
10.Perform a two-port calibration on channel 2 for Port 2 and Port 3.
11.Turn on the dual channel feature by pressing Display, DUAL CHAN ON.
Measurement capabilities are shown below for channel 1 and channel 2:
NOTE These examples may be saved in an instrument state and recalled later.
The port settings and TTL states are saved in the instrument state.
To save this instrument state, press Save/Recall, SAVE STATE.
Channel 1 Channel 2
S
31
PORT 1-PORT 3
Trans.
S
32
PORT 2-PORT 3
Trans.
S
11
PORT 1 Refl. S
22
PORT 2 Refl.
S
33
PORT 3 Refl. S
33
PORT 3 Refl.
S
13
PORT 3-PORT 1
Trans.
S
23
PORT 3-PORT 2
Trans.