User`s guide

1-2 Chapter1
System Verification and Performance Tests
Service Equipment
Service Equipment
Table 1-1 and Table 1-2 list the tools, equipment, cables, and adapters
needed when servicing, testing, or adjusting the three-port test set.
Table 1-1 Required Tools
T-8, T-10, T-15, T-20, and T-25 TORX screwdrivers
Flat-blade screwdrivers: small, medium, and large
5/16-inch open-end wrench (for SMA nuts)
2-mm extended bit allen wrench
3/16, 5/16, and 9/16-inch hex nut drivers
5/16-inch open-end torque wrench (set to 10 in-lb)
2.5-mm hex-key driver
Nonconductive and nonferrous adjustment tool
Needlenose pliers
Tweezers
Antistatic work mat with wrist strap