User`s guide

Chapter 1 1-3
System Verification and Performance Tests
Service Equipment
Table 1-2 Service Equipment
Required Equipment Critical Specifications Recommended Model
Use
a
Verification Kit, 7-mm No substitute 85029B P
Port Extension Cable Set, 7-mm 11857D A, P
Printer HP ThinkJet/DeskJet/LaserJet P
Adapter (3) (m) APC-7 to Type-N 11525A A, P
Frequency Counter 30 kHz to 500 MHz 5350B/51B/52B P
Frequency Counter 500 MHz to 6 GHz
(Option 006)
5350B/51B/52B P
Adapter APC-3.5 (f) to Type-N (f) P/N 1250-1745 A, P
Adapter Type-N (f) to BNC (m) P/N 1250-1477 P
External Source Maximum spurious input: <−30 dBc
Residual FM: <20 kHz
83620A P
Cable RF APC-7, 24-inch P/N 8120-4779 A, P
Adapter APC-3.5 (f) to APC-7 P/N 1250-1747 A, P
Adapter APC-3.5 (m) to APC-7 P/N 1250-1746 A, P
Adapter APC-3.5 (m) to Type-N (f) P/N 1250-1750 A, P
Cable APC-7, 24-inch P/N 8120-4779 A, P
Power Sensor 8482A A, P, T
Step Attenuator, 110 dB No substitute 8496A Option 001, H18 P
Adapter Type-N (f) to Type-N (f) P/N 1250-0888 P
Adapter Type-N (m) to Type-N (m) P/N 1250-1475 P
Cable, GPIB 10833A A
Diskette, 3.5 inch any
Attenuator (2), 20 dB, Type-N 8491A Option 020 P,T
Calibration Kit, 50 Ω Type-N No substitute 85032B P
50 Ω Type-N (m) Terminations (3) No substitute 909F P
Calibration Kit, Type-N 50 Ω No substitute 85032B P
Calibration Kit, 7-mm No substitute 85031B P
Power Meter, (GPIB) 437B/438A or
E4418B/4419B
A, P, T
Power Sensor 3 GHz to 6 GHz 8481A A, P, T
Cable, RF (3) 50 Ω Type-N (m) to (m) P/N 8120-4781 A, P
a. P=Performance Test, A=Adjustment, T=Troubleshooting