User`s guide

Chapter 1 1-37
System Verification and Performance Tests
Performance Tests
12.This ends the test. If you have problems, refer to “In Case of
Difficulty,” next.
In Case of Difficulty
1.Ensure that the power meter and power sensor(s) are operating to
specifications. Be sure you set the power meter calibration factor for
the range of frequencies you are testing.
2.Verifythereispowercomingoutoftheanalyzer'stestport1.Besure
you did not accidentally switch off the analyzer's internal source. If
youdidso,pressPower,SOURCEPWRONtoturnbackontheinternal
source.
3.Repeat this performance test.