Specifications

4-47
Hardkey/Softkey Reference
Analyzer Functions
selects the display reference line for color modification.
selects the reference line for printer color modification.
sets the position of the reference line on the graticule of a
Cartesian display, with 0 the bottom line of the graticule
and 10 the top line. It has no effect on a polar or Smith
display. The reference position is indicated with a small
triangle just outside the graticule, on the left side for
channel 1 and the right side for channel 2.
changes the value of the reference line, moving the
measurement trace correspondingly. In polar and Smith
chart formats, the reference value is the same as the scale,
and is the value of the outer circle.
defines the measurement as S
11
, the complex reflection
coefficient (magnitude and phase) of the test device input.
defines the measurement as S
22
, the complex reflection
coefficient (magnitude and phase) of the test device
output.
measures the reflection and thru paths of the current
calibration standard.
leads to the reflection calibration menu.
completes the adapter removal procedure, removing the
effects of the adapter being used.
allows you to change the name of a file that has already
been saved.
resets the color being modified to the default color.
• When in the specify class more menu, is
used to enter the standard numbers for a response
calibration. This calibration corrects for frequency
response in either reflection or transmission
measurements, depending on the parameter being
measured when a calibration is performed. (For default
kits, the standard is either the open or short for
reflection measurements, or the thru for transmission
measurements.)
• When in the response cal menu, leads to
the frequency response calibration. This is the simplest
and fastest accuracy enhancement procedure, but
should be used when extreme accuracy is not required.
It effectively removes the frequency response errors of
the test setup for reflection or transmission
measurements.
REF LINE
REF LINE [ ]
REFERENCE POSITION
REFERENCE VALUE
REFL: FWD S11 (A/R)
REFL: REV S22 (B/R)
REFLECT AND LINE
REFLECTION
REMOVE ADAPTER
RENAME FILE
RESET COLOR
RESPONSE
RESPONSE
RESPONSE