Specifications

4-51
Hardkey/Softkey Reference
Analyzer Functions
measures the short circuit TRL/LRM calibration data for
PORT 1.
provides an S11 and S21 enhanced response calibration
(forward direction). Enhanced response generates a 1-port
cal for S11 and an improved calibration over the response
cal for S21.
provides a measurement calibration for reflection-only
measurements of one-port devices or properly terminated
two-port devices, at port 2 of an S-parameter test set or
the transmission test port of a transmission/reflection test
set.
provides an S22 and S12 enhanced response calibration
(reverse direction). Enhanced response generates a 1-port
cal for S22 and an improved calibration over the response
cal for S12.
is used to enter the standard numbers for the first class
required for an S
22
1-port calibration. (For default cal kits,
this is the open.)
is used to enter the standard numbers for the second class
required for an S
22
1-port calibration. (For default cal kits,
this is the short.)
is used to enter the standard numbers for the third class
required for an S
22
1-port calibration. (For default kits,
this is the load.)
measures the short circuit TRL/LRM calibration data for
PORT 2.
selects whether sampler correction is on or off.
saves the modified version of the color set.
saves the display information to the disk drive. The type of
information saved is dependent on the FILETYPE
selection. The FILETYPE selection can either be graphic
or text.
accesses the save file menu which allows you to save the
display information to the disk drive as either graphic or
textual information.
stores the user-modified or user-defined kit into memory,
after it has been modified.
selects ASCII format for data storage to disk.
selects binary format for data storage.
S11 REFL SHORT
S11/21 ENH. RESP
S22 1-PORT
S22/12 ENH. RESP
S22A
S22B
S22C
S22 REFL SHORT
SAMPLR COR on OFF
SAVE COLORS
SAVE FILE
SAVE FILE FORMATS
SAVE USER KIT
SAVE USING ASCII
SAVE USING BINARY