Specifications

4-57
Hardkey/Softkey Reference
Analyzer Functions
smoothing aperture is not the group delay aperture unless
smoothing is on.
turns the smoothing function on or off for the active
channel. When smoothing is on, the annotation "Smo" is
displayed in the status notations area.
turns the source power on or off. Use this key to restore
power after a power trip has occurred. (See the
key description.)
inserts a space in the title.
is used, along with the key, to define the
frequency range of the stimulus. When the key is
pressed, it becomes the active function. The value is
displayed in the active entry area, and can be changed
with the knob, step keys, or numeric keypad.
sets the frequency or power span of a subsweep about a
specified center frequency.
presents the special function menu.
leads to the specify class menu. After the standards are
modified, use this key to specify a class to consist of certain
standards.
finishes the specify class function and returns to the
modify cal kit menu.
(Option 010 only) is used to specify the parameters of the
gate.
allows additional specifications for a user-defined
standard. Features specified in this menu are common to
all five types of standards.
toggles between a full-screen single graticule display or
two-, three-, or four-graticule, multiple-channel display.
Works with to determine the
number of channels displayed.
selects whether spur avoidance is ON or OFF. Selecting
spur avoidance OFF, along with selecting raw offsets OFF,
saves substantial time at recalls and during frequency
changes. Spur avoidance is always coupled between
channels.
returns to the define standard menu.
SMOOTHING on OFF
SOURCE PWR on OFF
POWER
SPACE
Span Center
Span
SPAN
SPECIAL FUNCTIONS
SPECIFY CLASS
SPECIFY CLASS DONE
SPECIFY GATE
SPECIFY OFFSET
SPLIT DISP 1X 2X 4X
DUAL CHAN on OFF
SPUR AVOID On Off
STANDARD DONE