Specifications

4-67
Hardkey/Softkey Reference
Analyzer Functions
(Option 010 only) is used to set the window of a time
domain measurement to the minimum value. Provides
essentially no window.
(Option 010 only) is used to set the window of a time
domain measurement to the normal value. Usually the
most useful because it reduces the sidelobes of the
measurement somewhat.
is used to terminate basic units: dB, dBm, Hz, dB/GHz,
degrees, or seconds. It may also be used to terminate
unitless entries such as averaging factor.
toggles the PLOTTER/PRINTER serial port data transmit
control mode between the Xon-Xoff protocol handshake
and the DTR-DSR (data terminal ready-data set ready)
hardwire handshake.
converts reflection data to its equivalent admittance
values.
converts transmission data to its equivalent admittance
values.
converts reflection data to its equivalent impedance
values.
converts transmission data to its equivalent impedance
values.
WINDOW: MINIMUM
WINDOW: NORMAL
x1
XMIT CNTRL [ ]
Y: REFL
Y: TRANS
Z: REFL
Z: TRANS