Specifications

6-6
Options and Accessories
Accessories Available
• 85038A 50-ohm 7-16 calibration kit (30 kHz to 7.5 GHz)
Contains open and short circuits, fixed loads and wrenches.
• 85038F 50-ohm 7-16 calibration kit (30 kHz to 7.5 GHz)
Contains fixed loads, open and short circuits, and adapters.
• 85038M 50-ohm 7-16 calibration kit (30 kHz to 7.5 GHz)
Contains a fixed load, open and short circuits, and a adapter.
• 85038M 50-ohm 7-16 calibration kit (30 kHz to 7.5 GHz)
Contains a fixed load, open and short circuits, and a adapter.
RF electronic calibration modules and PC software
This product family provides electronic calibration (ECal) capability. With ECal, the usual
calibration kit standards are replaced by one solid-state calibration module that can be
programmed by the Windows-based software to present many different impedances to the
test ports. A full two-port calibration can be done with a single connection, with reduced
errors and wear on connectors. ECal requires the 85097A PC interface kit, an 85090-series
calibration module in the appropriate connector type, and a PC running Windows(r) 95, 98,
or NT 4.0.
• 85097A ECal PC interface kit and softwareContains PC interface module for connecting
an ECal module to a PC and ECal control software.
• 85091A 50-ohm 7-mm RF ECal module
• 85092A 50-ohm type-N RF ECal module; type-N (m) to type-N (f)
— Option 00F substitutes module with two type-N female connectors.
— Option 00M substitutes module with two type-N male connectors.
— Option 00A adds type-N (m) to type-N (m) adapter and type-N (f) to type-N (f)
adapter
• 85093A 50-ohm 3.5-mm RF ECal module; 3.5-mm(m) to 3.5-mm(f)
— Option 00F substitutes module with two 3.5-mm female connectors.
— Option 00M substitutes module with two 3.5-mm male connectors.
— Option 00A adds 3.5-mm(f) to 3.5-mm(f) adapter and 3.5-mm(m) to 3.5-mm(m)
adapter
• 85098A 50-ohm 7-16 RF ECal module; 7-16(m) to 7-16(f)
— Option 00F Substitutes module with two 7-16 female connectors.
— Option 00M Substitutes module with two 7-16 male connectors.
— Option 00A adds 7-16(m) to 7-16(m) adapter and 7-16(f) to 7-16(f) adapter.
• 85096A 75-ohm type-N RF ECal module; 75-ohm type-N (m) to type-N (f)
— Option 00F substitutes module with two type-N female connectors.
— Option 00M substitutes module with two type-N male connectors.
— Option 00A adds type-N (m) to type-N (m) adapter and type-N (f) to type-N (f)