Specifications
6-7
Options and Accessories
Accessories Available
adapter
• 85099A 75-ohm type-F RF ECal module; type-F (m) to type-F (f)
— Option 00F substitutes module with two type-F female connectors.
— Option 00M substitutes module with two type-F male connectors.
— Option 00A adds type-F (m) to type-F (m) adapter and type-F (f) to type-F (f) adapter
Verification Kit
85029B 7-mm verification kit
Includes attenuators and mismatch attenuator with data on a 3.5 inch disk for use in
confirming accuracy enhanced system measurement performance, traceable to national
standards. Test procedure is provided in the service guide. For use with a standard
8753ES, or with systems including an 8753ES Option 011 and an 85046A, or 85047A test
set. This verification kit may also be used with an 8753ET with the addition of two type-N
(m) to 7-mm adapters. The 85031B 7-mm calibration kit and 11857D test-port cables are
also required.
Test sets
• 85046A 50-ohm S-parameter test set
300 kHz to 3 GHz. Requires the 11857D 7-mm test-port return cables for two-port
device measurements. Includes a test set interconnect cable and four RF cables to
connect to the analyzer.
— Option 009 substitutes mechanical transfer switch
— Option 913 rack-mount kit, part number 5062-4069
• 85046B 75-ohm S-parameter test set
300 kHz to 2 GHz. Requires the 11857B 75-ohm test-port return cables. Includes a test
set interconnect cable and four RF cables to connect to the analyzer.
— Option 009 Substitutes mechanical transfer switch
— Option 913 Rack-mount kit, part number 5062-4069
• 85047A 50-ohm S-parameter test set
300 kHz to 6 GHz. Requires the 11857D 7-mm test-port return cables for two-port
device measurements. Includes a test set interconnect cable and four RF cables.
— Option 009 substitutes mechanical transfer switch
— Option 913 rack-mount kit, part number 5062-4069
• 11850C 50-ohm type-N three-way power splitter
300 kHz to 3 GHz. Requires the 11851B RF cable kit.
• 11850D 75-ohm type-N three-way power splitter
300 kHz to 2 GHz. Includes three 11852B 50 to 75-ohm minimum loss pads for use with
50-ohm ports. Requires the 11851B RF cable kit.
• 11667A 50-ohm type-N two-way power splitter
DC to 18 GHz. Requires the 11851B RF cable kit.