Specifications

6-9

Options and Accessories

Accessories Available

Test Conﬁguration Accessories

RF Limiter

Externally attaches to one or both test ports of the analyzer. Provides protection against

potential high-power transients from external devices.

• 11930A 7-mm RF limiter, DC to 6 GHz, max power +28 dBm typical

• 11930B 50-ohm type-N RF limiter, 5 MHz to 6 GHz, max power +28 dBm typical

Probe

85024A high-frequency probe

Provides high-impedance in-circuit test capability, from 300 kHz to 3 GHz.

Ampliﬁer

8347A RF power ampliﬁer

Used to set leveled output power or increase system dynamic range, from 100 kHz to

3 GHz.

8347A RF power ampliﬁer

Used to set leveled output power or increase system dynamic range, from 100 kHz to

3 GHz.

Power Meters

For more accurate control of leveled test-port power. Requires a 8480-series power sensor

and an GPIB cable for connection to the analyzer.

• E4418B single-channel power meter

• E4419B dual-channel power meter

Power Sensors

For more accurate control of leveled test-port power. Requires a 436A, 437B, 438B, or

E4419B power meter and an GPIB cable for connection to the network analyzer.

• 8481A 10 MHz to 18 GHz, type-N (m), 100 mwatt

• 8481B 10 MHz to 18 GHz, type-N (m), 25 watt

• 8482A 100 kHz to 4.2 GHz, type-N (m), 100 mwatt

• 8482B 100 kHz to 4.2 GHZ, type-N (m), 25 watt

• 8483A 100 kHz to 2 GHZ, 75-ohm type-N (m), 100 mwatt

• 8485A 50 MHz to 26.5 GHz, 3.5-mm (m), 100 mwatt