Specifications

4-6
Hardkey/Softkey Reference
Analyzer Functions
selects the 85056A/D cal kit.
selects the 85056K cal kit.
selects the 2.92 mm cal kit model.
selects the 85033C cal kit.
sets up a four-graticule display with channel 2 in the
upper right quadrant and channel 3 in the lower left
quadrant.
sets up a four-graticule display with channel 3 in the
upper right quadrant and channel 2 in the lower left
quadrant.
provides single-keystroke options to quickly set up
multiple-channel displays, and information on
multiple-channel displays.
selects the 85038A/F/M cal kit.
measures the absolute power amplitude at input A.
calculates and displays the complex ratio of input A to
input B.
calculates and displays the complex ratio of the signal at
input A to the reference signal at input R.
puts the name of the active entry in the display title.
puts the active marker magnitude in the display title.
selects coaxial as the type of adapter used in adapter
removal calibration.
selects waveguide as the type of adapter used in adapter
removal calibration.
is used to enter the value of electrical delay of the adapter
used in adapter removal calibration.
provides access to the adapter removal menu.
1) displays the edit segment menu and adds a new
segment to the end of the list. The new segment is initially
a duplicate of the segment indicated by the pointer > and
selected with the softkey.
2) adds a new frequency band to the Ripple Limit list
which is indicated by the pointer >. The new frequency
band is a duplicate of the most recently selected frequency
band.
2.4 mm 85056
2.92* 85056K
2.92 mm other kits
3.5 mm C 85033C
4X: [1] [2]/[3] [4]
4X: [1] [3]/[2] [4]
4 PARAM DISPLAYS
7-16 85038
A
A/B
A/R
ACTIVE ENTRY
ACTIVE MAGNITUDE
ADAPTER: COAX
ADAPTER: WAVEGUIDE
ADAPTER DELAY
ADAPTER REMOVAL
ADD
SEGMENT