Specifications

4-24
Hardkey/Softkey Reference
Analyzer Functions
(Option 010 only) allows you to specify the time at the
center of the gate.
(Option 010 only) allows you to specify the gate periods.
(Option 010 only) allows you to specify the starting time of
the gate.
(Option 010 only) allows you to specify the stopping time of
the gate.
(Option 010 only) leads to the gate shape menu.
(Option 010 only) selects the widest time domain gate with
the smallest passband ripple.
(Option 010 only) selects the narrowest time domain gate
with the largest passband ripple.
(Option 010 only) selects an intermediate time domain
gate.
(Option 010 only) selects an intermediate time domain
gate.
copies the sequence titles currently in memory into the six
softkey positions.
calls sub-routines in sequencing.
sets the format of the graphic file when
is selected. The only graphic
selection currently available is the JPEG format.
specifies whether or not to store display graphics on disk
with the instrument state.
brings up the graticule print color definition menu. The
graticule default print color is cyan.
selects the display graticule for color modification.
(Option 002 only) leads to the harmonics menu. Measured
harmonics cannot exceed the frequency range of the
analyzer receiver.
(Option 002 only) turns off the harmonic measurement
mode.
(Option 002 only) selects measurement of the second
harmonic.
(Option 002 only) selects measurement of the third
harmonic.
GATE: CENTER
GATE: SPAN
GATE: START
GATE: STOP
GATE SHAPE
GATE SHAPE MAXIMUM
GATE SHAPE MINIMUM
GATE SHAPE NORMAL
GATE SHAPE WIDE
GET SEQ TITLES
GOSUB SEQUENCE
GRAPH FMT [ ]
FILETYPE: GRAPHIC
GRAPHICS on OFF
GRATICULE [ ]
GRATICULE
HARMONIC MEAS
HARMONIC OFF
HARMONIC SECOND
HARMONIC THIRD