Specifications

4-36
Hardkey/Softkey Reference
Analyzer Functions
calculates and displays the mean, standard deviation, and
peak-to-peak values of the section of the displayed trace
between the active marker and the delta reference marker.
If there is no delta reference, the statistics are calculated
for the entire trace. A convenient use of this feature is to
find the peak-to-peak value of passband ripple without
searching separately for the maximum and minimum
values.
The statistics are absolute values: the delta marker here
serves to define the span. For polar and Smith chart
formats, the statistics are calculated using the first value
of the complex pair (magnitude, real part, resistance, or
conductance).
puts a fixed reference marker at the present active marker
position, and makes the fixed marker stimulus and
response values at that position equal to zero. All
subsequent stimulus and response values of the active
marker are then read out relative to the fixed marker. The
fixed marker is shown on the display as a small triangle ∆
(delta), smaller than the inactive marker triangles. The
softkey label changes from to
and the notation "∆REF = ∆" is
displayed at the top right corner of the graticule. Marker
zero is canceled by turning delta mode off in the delta
marker menu or turning all the markers off with the
softkey.
leads to the modify cal kit menu, where a default cal kit
can be user-modified.
present a menu for color modification of display elements.
Refer to the section on adjusting the display color in the
“Using Measurement Functions” chapter of the user’s
guide for information on modifying display elements.
selects the 85036B/E cal kit.
sets the N dB point which is used to determine the
bandwidth test cutoff frequencies. Enter the number of
decibels below the peak of the bandpass that the filter is
specified.
sets the analyzer to network analyzer mode.
activates the sequence edit mode and presents the
new/modify sequence menu with a list of sequences that
can be created or modified.
puts a new line command into the display title.
steps forward through a tabular list of data page-by-page.
MKR STATS on OFF
MKR ZERO
MKR ZERO
MKR ZERO
∆
REF =
∆
ALL OFF
MODIFY [ ]
MODIFY COLORS
N 75
Ω
85036
N DB POINTS
NETWORK ANALYZER
NEW SEQ/MODIFY SEQ
NEWLINE
NEXT PAGE