Specifications

4-41
Hardkey/Softkey Reference
Analyzer Functions
selects plotting of all displayed text except the marker
values, softkey labels, and display listings such as the
frequency list table or limit table. (Softkey labels can be
plotted under the control of an external controller. Refer to
the programmer’s guide.)
sets the serial port data transmission speed for plots.
sends a page eject command to the plotter.
configures the port analyzer will use to communicate with
the plotter.
directs plots to the selected disk (internal or external).
directs plots to the GPIB port and sets the GPIB address
the analyzer will use to communicate with the plotter.
configures the analyzer for a plotter that has a parallel
(centronics) interface.
configures the analyzer for a plotter that has a serial
(RS-232) interface.
selects a pen plotter such as the HP 7440A, HP 7470A,
HP 7475A, or HP 7550B as the plotter type.
selects a PCL5 compatible printer, which supports
HP-GL/2, such as the LaserJet III or LaserJet 4 for a
monochrome plotter type, or the DeskJet 1200C for a color
plotter type.
displays a polar format. Each point on the polar format
corresponds to a particular value of both magnitude and
phase. Quantities are read vectorally: the magnitude at
any point is determined by its displacement from the
center (which has zero value), and the phase by the angle
counterclockwise from the positive x-axis. Magnitude is
scaled in a linear fashion, with the value of the outer circle
usually set to a ratio value of 1. Since there is no frequency
axis, frequency information is read from the markers.
leads to a menu of special markers for use with a polar
format.
goes to the reference plane menu, which is used to extend
the apparent location of the measurement reference plane
or input.
is used to set the same power levels at each port.
allows you to set different power levels at each port.
PLOT TEXT ON off
PLOTTER BAUD RATE
PLOTTER FORM FEED
PLOTTER PORT
PLTR PORT: DISK
PLTR PORT GPIB
PLTR PORT PARALLEL
PLTR PORT SERIAL
PLTR TYPE [PLOTTER]
PLTR TYPE [HPGL PRT]
POLAR
POLAR MKR MENU
PORT EXTENSIONS
PORT POWER [COUPLED]
PORT POWER [UNCOUPLED]