Technical data

2-32 Chapter 2
Performance Tests
9. Receiver Input Crosstalk
9. Receiver Input Crosstalk
Perform this test to verify the signal leakage interference between input and output test
ports, with one port driven and the other one terminated.
Analyzer warmup time: 30 minutes.
Specifications
Required Equipment
Procedure
R into A Crosstalk from 300 kHz to 1 GHz
1. Connect the equipment as shown in Figure 2-14.
Frequency Range
Crosstalk
a
a. At 10 Hz IF Bandwidth
300 kHz–1 GHz −100 dB
1 GHz–3 GHz −90 dB
3 GHz–4.5 GHz −82 dB
4.5–6.0 GHz −75 dB
Description HP/Agilent Model Number
2-way power splitter (2), 50Ω 11667A Option 001
Termination (3), 50Ω
909F Option 012
a
a. Or use terminations included in 85032B calibration kits.
Attenuator, 20 dB 8491A Option 020
RF cable set, 50Ω, type-N 11851B