Technical data

Index-4 Index
Index
the fractional-N frequency
range adjustment
, 3-53
the fractional-N spur
avoidance and FM
sideband adjustment
, 3-54
troubleshoot
digital control group
, 6-1
receiver
, 8-1
source group, 7-1
I
IF amplifier correction constants
adjustment
, 3-16
IF Det 1
, 10-35
IF Det 2N
, 10-34
IF Det 2W
, 10-34
information,ordering, 13-5
initialize EEPROMs
, 3-32
input impedance test
, 2-42
input traces A and B check, 8-4
inspect cables
, 6-15
instrument markings
, 15-4
intermittent problems, 5-20
internal diagnostic
menus
, 10-3, 10-4
tests, 6-16
internal tests
, 4-13, 10-8, 10-10
invoking tests remotely
, 10-42
isolation (crosstalk, EXF and
EXR)
, 11-12
K
key codes
, 6-13
key conventions, 1-iv
key failure identification
, 6-13
keypad assemblies
, 14-10
keys
how to identify stuck
, 6-13
identifying stuck
, 6-13
test menu
, 10-5
L
L ENREF line
, 7-18
L HB and L LB Lines
, 7-18
L INTCOP as trigger to observe
control lines
, 8-10
L INTCOP as trigger to observe
data lines
, 8-10
L LB and L HB Lines
, 7-18
L LB and L HB lines
, 7-19
LEDs
, 4-5, 4-11, 4-12
line fuse
, 5-7, 14-5
line fuse,removing
, 5-7
line voltage, 5-7
linearity, power
, 2-6
LO (2ND) waveforms
, 7-17
LO OUT waveform at A14J2, 7-22
load match (ELF and ELR)
, 11-13
lock error, 7-6
log amplifier output detector
,
10-28
low band
REF signal
, 7-15
subsweep frequencies
, 12-18
M
magnitude
compression test
, 2-58
dynamic accuracy test
, 2-48
frequency response test
, 2-23
of sampler adjustment
, 3-19
main ADC
, 10-20
maintenance, 15-2
major assemblies
, 13-8, 13-10
bottom view
, 13-10
part numbers, 13-10
rebuilt-exchange
, 13-4
measurement
control signals
, 9-11
voltage matrix
, 9-11
mechanical adjustment
sequences
, 3-53
memory deck
, 13-32
message for phase lock error
, 7-6
minimum R channel level test,
2-12
Mn Pwr DAC (main power DAC)
,
10-23
motherboard assembly
, 14-32
motherboard inspection
, 5-12
N
NO IF FOUND
CHECK R INPUT LEVEL
, 7-30
NO PHASE LOCK
CHECK R INPUT LEVEL
, 7-30
noise floor level test
, 2-16, 2-19
Normal and Alter switch position
adjustment
, 3-6
number (option) adjustment
, 3-31
number (serial) adjustment
, 3-30
O
offset (ADC) adjustment
, 3-18
open loop compared to phase
locked output in SRC mode
,
7-10
operating temperature
, 5-12
operation check of A9 CPU
, 6-5
operation verification
post-repair
, 3-3
operator’s check
, 4-6
operator’s check failed, 4-7
option numbers correction
constants adjustment
, 3-31
options
002, harmonic mode
, 1-6
006, 6 GHz, 1-6
010, time domain
, 1-6
1CM, rack mount flange kit
without handles
, 1-6
1CP, rack mount flange kit with
handles
, 1-6
1D5, high stability frequency
reference
, 1-6
available
, 1-6
service and support (W01, W31,
W32, W34, W50, W51,
W52)
, 1-7
service and support (W54), 1-8
ordering information
, 13-5
oscilloscope check for reference
frequencies
, 7-14
output frequency in SRC tune
mode
, 7-9
output voltages, 5-10
overload on input error messages
,
8-4
P
panel key codes
, 6-13
parts list
, 13-7
documentation
, 13-37
front panel assembly, 13-20
hardware
, 13-31
miscellaneous
, 13-37
tools, 13-37
upgrade kits
, 13-37
peek/poke menu
, 10-40
performance test record
, 2-3, 2-73
performance tests
, 2-2
external source mode frequency
range
, 2-14
harmonic measurement
accuracy
, 2-70
post-repair
, 3-3
receiver channel noise floor
level
, 2-16, 2-19
receiver input crosstalk
, 2-32
receiver input impedance
, 2-42
receiver magnitude
compression
, 2-58
receiver magnitude dynamic
accuracy
, 2-48
receiver magnitude frequency
response
, 2-23
receiver minimum R channel
level
, 2-12