Technical data

Index-6 Index
Index
upgrade kits, 13-37
replacement sequence, assembly
,
5-3
replacing an assembly
, 13-3, 14-3
RF OUT power level
, 10-26
RF output power correction
constants adjustment
, 3-11
RF power from source
, 7-5
S
sampler magnitude correction
constants adjustment
, 3-19
search for spurs
with a filter
, 3-27
without a filter
, 3-28
selector switch
, 5-7
self diagnose softkey, 10-7
self-test
, 4-5
sequence
fractional-N frequency range
adjustment
, 3-53
fractional-N spur avoidance and
FM sideband adjustment
,
3-54
high/low band transition
adjustment
, 3-54
sequence contents
, 3-54
for fractional-N avoidance and
FM sideband adjustment
,
3-56
for fractional-N frequency range
adjustment
, 3-55
for high/low band transition
adjustment
, 3-54
for VCO adjustment, 3-55
serial number correction
constants adjustment
, 3-30
service
feature menus
, 10-16
key menus and error messages
,
10-1, 10-2
key test menu
, 10-4
mode menu keys
, 10-16, 10-17
options
, 1-7, 1-8
setup
cavity oscillator frequency
correction constant routine
,
3-26
check, disk drive
, 4-9
check, plotter or printer
, 4-8
fractional-N spur avoidance and
FM sideband adjustment
,
3-47
frequency accuracy adjustment
,
3-42
intensity check, 6-8
phase lock error
troubleshooting
, 7-6
shipment for service, 15-2
shorts and opens
, 9-7
signal examination for phase lock
,
7-29
signal separation
, 12-26
signals required for A10 assembly
operation
, 8-9
simplified block diagram
, 5-4
Smith chart of shorts and opens
,
9-7
softkey, firmware revision
, 10-41
source
adjustment
default correction constant
,
3-7
pretune correction constants,
3-10
pretune default correction
constants
, 3-8
spur avoidance tracking
, 3-50
and A11 phase lock check
, 7-8
assembly, 14-20
external source mode
, 12-24
frequency offset
, 12-22
group assemblies, 7-1
group troubleshooting appendix
,
7-30
harmonic analysis (option 002),
12-22
high band operation
, 12-19
low band operation, 12-17
match (ESF and ESR)
, 11-10
operation in other
modes/features
, 12-22
oscillator tuning voltage
, 10-32
output power
, 4-14
phase lock error messages
, 4-14
power
, 7-5
super low band operation
, 12-16
test
frequency range and accuracy
,
2-4
power range, linearity, and
accuracy
, 2-6
source and receiver
harmonics
, 2-66
theory overview
, 12-14
troubleshooting
, 7-1
spikes display (acceptable versus
excessive)
, 3-51
spur avoidance
and FM sideband adjustment
,
3-47
tracking adjustment
, 3-50
spur search with a filter, 3-27
Src 1V/GHz (source 1 volt per
GHz), 10-24
SRC tune mode
frequency output
, 7-9
phase locked output compared to
open loop
, 7-10
waveform integrity
, 7-9
stable HI OUT signal in FRACN
TUNE mode
, 7-27
stuck keys, identifying using LED
patterns
, 6-13
support options, 1-7, 1-8
sweep delay
, 9-11
switch position adjustment
, 3-6
switch repeatability
, 9-4
system verification
post-repair
, 3-3
tests, 10-11
T
temperature sensor
, 10-26
test
descriptions
, 10-8
menu keys
, 10-5
options menu
, 10-6
patterns, 10-14
record
, 2-3, 2-73
status terms
, 10-4
test patterns, 10-14
tests (diagnostics)
, 6-16
theory of operation
, 12-1
+5 V digital supply, 12-7
A1 front panel
, 12-11
A2 front panel processor
, 12-11
A3 source, 12-15
A7 pulse generator
, 12-14
A8 post regulator
, 12-7
A9 CPU/A10 digital IF
, 12-11
A11 phase lock
, 12-14
A12 reference
, 12-14
A14/A13 Fractional-N
, 12-14
A15 preregulator
, 12-6
A16 rear panel
, 12-13
A17 inverter
, 12-13
A18 display
, 12-12
A19 GPS
, 12-12
digital block diagram
, 12-9
digital control
, 12-9
digital signal processor
, 12-12
display power
, 12-8
EEPROM
, 12-12
fan circuit and air flow detector
,
12-8
function groups
, 12-5
line power module
, 12-6
main CPU and RAM, 12-11
microprocessor
, 12-4