Technical data

2-36 Chapter 2
Performance Tests
9. Receiver Input Crosstalk
33.Press .
34.Press
.
35.At the end of the sweep, press
.
36.Press
.
37.When the analyzer finishes the number of sweeps, write the marker value, which
appears on the analyzer display, on the performance test record.
A into B Crosstalk from 1 GHz to 3 GHz
38.Press .
39.Press
.
40.At the end of the sweep, press
.
41.Press
.
42.When the analyzer finishes the number of sweeps, write the marker value, which
appears on the analyzer display, on the performance test record.
(Only for Option 006 Analyzers) A into B Crosstalk from 3 GHz to 4.5 GHz
43.Press .
44.Press
.
45.At the end of the sweep, press
.
46.Press
.
47.When the analyzer finishes the number of sweeps, write the marker value, which
appears on the analyzer display, on the performance test record.
(Only for Option 006 Analyzers) A into B Crosstalk from 4.5 GHz to 6 GHz
48.Press .
49.Press
.
50.At the end of the sweep, press
.
Start 300 k/m Stop 1 G/n
Meas
A/R
Avg
AVERAGING OFF
Sweep Setup
TRIGGER MENU
SINGLE
Display
DATA → MEMORY DATA/MEM
Meas
B/R
Avg
AVERAGING FACTOR
5 x1
AVERAGING ON
Sweep Setup
TRIGGER MENU NUMBER of GROUPS
5 x1
Start 1 G/n Stop 3 G/n
Meas
A/R
Avg
AVERAGING OFF
Sweep Setup
TRIGGER MENU
SINGLE
Display
DATA → MEMORY DATA/MEM
Meas
B/R
Avg
AVERAGING FACTOR
5 x1
AVERAGING ON
Sweep Setup
TRIGGER MENU NUMBER of GROUPS
5 x1
Start 3 G/n Stop 4.5 G/n
Meas
A/R
Avg
AVERAGING OFF
Sweep Setup
TRIGGER MENU
SINGLE
Display
DATA → MEMORY DATA/MEM
Meas
B/R
Avg
AVERAGING FACTOR
5 x1
AVERAGING ON
Sweep Setup
TRIGGER MENU NUMBER of GROUPS
5 x1
Start 4.5 G/n Stop 6 G/n
Meas
A/R
Avg
AVERAGING OFF
Sweep Setup
TRIGGER MENU
SINGLE
Display
DATA → MEMORY DATA/MEM
Meas
B/R