Technical data

Chapter 2 2-53
Performance Tests
12. Receiver Magnitude Dynamic Accuracy
11.Take a power meter calibration sweep.
•
•
12.Verify that the power meter reads approximately −30 dBm.
Full 2-Port Calibration
13.Connect the equipment as shown in the Figure 2-23. Be sure to reconnect the cable to
the B channel connectors.
Figure 2-23 Full 2-Port Calibration
14.Perform a full 2-port error correction with isolation.
15.Save the results of the new cal set.
Measure Channel B Magnitude Dynamic Accuracy
16.Connect the equipment as shown in Figure 2-24. Confirm that the step attenuator is set
to 20 dB.
Cal
PWRMTR CAL
−30 x1
ONE SWEEP TAKE CAL SWEEP