Technical data

Chapter 2 2-65
Performance Tests
14. Receiver Phase Compression
Channel B Phase Compression
24.Connect the equipment as shown in Figure 2-30.
Figure 2-30 Channel B Phase Compression Test Setup
25.Press
.
26.Repeat step 23 for the CW frequencies listed in the performance test record.
In Case of Difficulty
1. If the analyzer fails the channel A compression test, suspect the A5 A sampler
assembly. Repeat this test. Replace the sampler assembly if the problem still exists.
2. Suspect the A6 B sampler assembly if the analyzer fails the channel B compression test.
Repeat this test. Exchange the sampler assembly if the failure still occurs.
Meas
B/R
Format
PHASE
Sweep Setup
TRIGGER MENU
CONTINUOUS