User`s guide

4-49
Printing, Plotting, and Saving Measurement Results
Re-Saving an Instrument State
Re-Saving an Instrument State
If you re-save a file, the analyzer overwrites the existing file contents.
NOTE You cannot re-save a file that contains data only. You must create a new file.
1. Press and select the storage device.
❏
❏
❏ (If necessary, refer to the external disk setup procedure in
"Saving an Instrument State" on page 4-36.)
2. Press and then use the or key or the front-panel knob to
highlight the name of the file that you want to re-save.
3. Press .
Deleting a File
1. Press .
2. Choose from the following storage devices:
❏
❏
❏ (If necessary, refer to the external disk setup procedure in
"Saving an Instrument State" on page 4-36.)
3. Press .
To Delete an Instrument State File
❏ Press the or keys or the front panel knob to highlight the name of the file
that you want to delete.
❏ Press to delete all of the files that make up
the selected instrument state.
To Delete all Files
❏ Press to delete all of
the files that are on the selected storage device.
Save/Recall
SELECT DISK
INTERNAL MEMORY
INTERNAL DISK
EXTERNAL DISK
RETURN
RE-SAVE STATE
YES
Save/Recall
SELECT DISK
INTERNAL MEMORY
INTERNAL DISK
EXTERNAL DISK
RETURN
FILE UTILITIES
DELETE FILE
YES
FILE UTILITIES
DELETE ALL FILES
SAVE USING BINARY