User`s guide

Index-8
Index
averaging, 7-36
IF bandwidth reduction
, 7-37
smoothing
, 7-37
non-coaxial
making measurements
, 6-48
non-coaxial devices, calibrating
for
, 6-50
noninsertable device
, 6-69
noninsertable devices, calibrating
for
, 6-40
O
offset and scale
, 7-9
offset limits menu
, 7-83
offset, electrical
, 6-6
offsetting limit lines
, 1-83
omitting isolation calibration
, 6-4
one-port calibration, S11 and S22
,
7-57
one-port error model
, 7-43
one-port reflection error
correction
, 6-26
operating parameters, printing or
plotting
, 4-32
operation
dual-channel
, 1-58
harmonic
, 1-58
single-channel
, 1-58
operation, frequency offset
, 7-87
operation, GPIB
, 7-79
operation, harmonic
, 7-88
operation, limit line
, 7-82
operation, system
, 7-3
operation, trace math
, 7-8
output power
, 7-10
power coupling options
, 7-11
understanding power ranges
,
7-10
outputting
measurement results
, 1-6
multiple plots to a single page
using a plotter
, 4-25
plot files
, 4-12
plot files from a PC to a plotter
,
4-22
single page plots using a printer
,
4-24
outputting plot files from a PC to
an HPGL compatible printer
,
4-23
sending the exit HPGL mode
and form feed sequence to
the printer
, 4-24
sending the HPGL initialization
sequence to the printer
,
4-24
sending the plot file to the
printer
, 4-24
storing the exit HPGL mode and
form feed sequence
, 4-24
storing the HPGL initialization
sequence
, 4-23
P
page quadrants, plotting
measurements in
, 4-28
parameters
lower stopband
, 1-73
measurement
, 1-4, 1-72, 6-4
passband
, 1-73
upper stopband
, 1-73
pass control mode
, 7-80
passband parameters
, 1-73
PC interface unit
, 6-59
PC, to view files on
, 4-20
pen numbers and colors, selecting
,
4-14
pen plotter
, 4-17, 4-18
plotting to
, 4-10
performance verification
, 5-5
performance, verifying
, 7-66
performing
2-port error corrections
, 6-42,
6-71
TRL calibration
, 6-52
TRM calibration
, 6-56
peripheral equipment, required
,
7-5
per-raw data arrays
, 7-8
phase
linearity
, 2-34
measurements
, 2-34
tracking
, 2-38
phase distortion
, 1-44, 1-46
phase format
, 7-26
phase or group delay
measurements
, 2-34
phase linearity and group delay
,
2-34
phase measurements
, 2-34
places where you can save
, 4-34
plot
aborting a process
, 4-31
plot files
outputting from a PC to a
plotter
, 4-22
outputting from a PC to an
HPGL compatible printer
,
4-23
sending to the printer
, 4-24
to output
, 4-12
to view on a PC
, 4-20
plot function, configuring
, 4-9
plotting to a pen plotter
, 4-10
plotting to an HPGL/2
compatible printer
, 4-9
plot function, defining
, 4-13
choosing display elements
, 4-13
choosing plot speed
, 4-16
choosing scale
, 4-15
resetting plotting parameters to
default values
, 4-16
selecting auto-feed
, 4-13
selecting line types
, 4-15
selecting pen numbers and
colors
, 4-14
plot speed, choosing
, 4-16
plotting
measurement results
, 4-3
measurement to a disk
, 4-11
measurements in page
quadrants
, 4-28
multiple measurements on a full
page
, 4-27
multiple measurements per
page from a disk
, 4-26
multiple measurements per
page using a pen plotter
,
4-18
one measurements per page
using a pen plotter
, 4-17
parameters, resetting to default
values
, 4-16
plotting to an HPGL compatible
printer
, 4-19
solving problems
, 4-33
plotting a measurement to a disk
to output the plot files
, 4-12
polar format
, 7-29
polar format markers
, 1-32
port extensions
, 5-5
power coupling options
, 7-11
channel coupling
, 7-11
test port coupling
, 7-11
power meter
calibration
, 2-12
calibration over IF range
, 2-20
calibration over RF range
, 2-23
power meter measurement
calibration
, 6-33
calibrating the analyzer receiver
to measure absolute power
,
6-39
compensating for directional
coupler response
, 6-35
entering the power sensor
calibration data
, 6-34
interpolation in power meter
calibration
, 6-34