User`s guide

1-53
Making Measurements
Characterizing a Duplexer (ES Analyzers Only)
Normally, a 2-port calibration requires a forward and reverse sweep to complete before the
displayed trace updates. For faster tuning, it is possible to set the number of sweeps for the
active display channel (S
11
and S
21
for channel 1 in this case) to update more often than
the inactive display channel. In this example we choose 8 updates of the forward
parameters to 1 update of the reverse in channel 1, and 8 updates of the reverse to 1
update of the forward in channel 2 (where the active parameters are S
22
and S
12
).
Press .
Press .
Chan 1 System
CONFIGURE MENU
TESTSET SW CONTINUOUS
8 x1
Chan 2 System
CONFIGURE MENU
TESTSET SW CONTINUOUS
8 x1