Installation guide

Setting up a LAN Instrument Network 20
Install the Jet Direct Card Accessories (if
required)
JetDirect Card accessory for the 6890A and 6890 Plus
The JetDirect card for connecting the 6890A and 6890 Plus to the
Chemstation via LAN can be added to an existing 6890 as accessory
#G2335A which includes the G1369A Jet Direct Card.
Part of the 6890 LAN option/accessory is a card cage and connector
that accommodates installation of the JetDirect card. This card cage
is not standard on every 6890. If the card cage is not installed on the
6890 GC this accessory kit must be ordered.
G2335A Jet Direct - LANCard
1. LAN card assy (G1369A) G1369-
60001
2. MIO support bracket G1550-
00320
3. MIO connector assy G1553-
60100
4. Support bracket standoff,
M3 male/female G1530-
20570
5. Screw, Torx T-10,
M3 × 6 mm 0515-0680
6. Screw, Torx T-20,
M4 × 12 mm 0515-2496
7. G1530-61485 – LAN Cable Category
5 100 Base-T twisted pair LAN cable
(8 Meter)
8. 5023-0203 – Cross-over (PC to
instrument) network cable
(shielded, 3 m long)
9. 5023-0202 – Twisted pair network
cable (shielded, 7 m long)
Table 4: The G2335A Jet Direct Accessory Kit for the 6890A and 6890 Plus GC