Technical data

204 Understanding Your Agilent ChemStation
9 Data Review, Reprocessing and Batch Review
Navigation Table in Data Analysis
Data Review Toolset
The review functionality of the Navigation Table allows you to step
automatically or manually through the loaded signals. Depending on the
selection specified in the Preferences / Signal/Review Options, the system can
automatically integrate the signal and print a report for each file as it is
loaded. The method applied to the data file is shown in the top menu.
Sequence Reprocessing Toolset
The sequence reprocessing toolset is available only when a sequence acquired
with ChemStation B.02.01 or higher is loaded that was acquired with Unique
Folder Creation switched on. It is possible to start, stop and pause the
reprocessing of the sequence. In addition, the toolbar gives access to the
following dialog boxes in order to change parameter for reprocessing
sequences and printing:
• Sequence Table (copy of the original *.s template, located in the sequence
data container)
• Sequence Parameters dialog box
• Sequence Output dialog box
• Sequence Summary Parameters dialog box
• Extended Statistic Parameters dialog box
• Save Current Sequence
• Print Current Sequence
Data Review Using the Navigation Table
Depending on your required workflow, you can review data in one of three
ways:
1 Review your sequence data using the individual method of each data file
(sequence data B.02.01or higher): Use the option Individual Method from Data
File (DA.M) in the Preferences / Signal/Review Options to have the system load
the individual data analysis method (DA.M) stored with the data file before
loading sequence data. As each line in the Navigation Table is accessed
during the data review process, the linked DA.M for the selected data file is
loaded and used for reviewing and generating the report. The method name