Technical data

Understanding Your Agilent ChemStation 205

Data Review, Reprocessing and Batch Review

Navigation Table in Data Analysis

is visible in the Status Bar; the system adds from data file in brackets (from

data file) to indicate that the loaded method is the individual method for

the data file.

2 Review your data using the sequence method: Use the option Sequence

Method in the Preferences / Signal/Review Options to have the system load the

sequence method corresponding to the current line of the Navigation Table.

This method is loaded whenever a data file is loaded and is used for

reviewing and generating the report. The method name is visible in the

Status Bar; the system adds sequence in brackets (sequence) to indicate

that the loaded method is the sequence method corresponding to the

current line of the Navigation Table.

3 Review your data using a different method: If you want to use a different

method for reviewing the data than the individual data analysis method

(DA.M) stored with the data file or the sequence method, the option current

method in Preferences / Signal/Review Option must be selected. In this case,

the system uses the currently loaded method for reviewing and generating

the report. The method name is visible in the Status Bar.

Sequence Reprocessing Using the Navigation Table

For reprocessing using the Navigation Table in Data Analysis, all necessary files

are present in the sequence data container:

• sequence data files (*.d)

• all methods (*.m) files used during the sequence

• copy of the original sequence template (*.s)

NOTE

For LC, CE, LC/MS and CE/MS systems, the option Individual Method from Data File

(DA.M) is selected by default.

For GC systems, the option Current Method is selected by default.

NOTE

Sequence data acquired with ChemStation revisions up to B.01.03 need to be reprocessed

using the reprocess option in the Method and Run Control view. The same applies to data

acquired in B.03.01 when Unique Folder Creation is switched off.

Sequence data acquired with ChemStation revisions B.02.01 and higher need to be

reprocessed using the reprocessing toolset in the Data Analysis Navigation Table.