Technical data

Understanding Your Agilent ChemStation 53
Methods
2
What Happens When a Method is Run?
Figure 3 Method Operation
Pre-run Command or Macro (Run Time Checklist)
If a pre-run command or macro is specified, it is executed before the analysis
is started. This part is typically used for system customizing in conjunction
with other software packages.
Data Acquisition (Run Time Checklist)
• All parameters are set to the initial conditions specified in the current
method.
• If specified the injection program is executed and an injection is made from
the currently defined vial.
• The monitor display shows the progress of the analysis including
chromatographic/electropherographic information, and spectral data if
available.
• Data are acquired and stored in a data file.
• When the Data Acquisition is finished, copy of the currently executed
method is stored as ACQ.M for the data file by default.
8]ZbHiVi^dchiVijh
EdhigjcbVXgd
9ViVZkVajVi^dc
>c_ZXi^dcVcY^chigjbZcigjc
EgZgjcbVXgd
EgZgjc
>c_ZXi^dc
GjcbZi]dYhiVgiZYk^V8]ZbHiVi^dcbZcj
HiVijhaZkZah
GVlYViV
[^aZXadhZY
HVkZGJC#Bdei^dcVa
HVkZ68F#BYZ[Vjai
YZ[Vjai
HVkZ96#B
I^bZ