Specifications

Notices
© Agilent Technologies, Inc. 2008
No part of this manual may be reproduced
in any form or by any means (including
electronic storage and retrieval or transla-
tion into a foreign language) without prior
agreement and written consent from Agi-
lent Technologies, Inc. as governed by
United States and international copyright
laws.
Manual Part Number
N7744-90A01
Edition
First edition, April 2008
Printed in Germany
Agilent Technologies Deutschland GmbH
Herrenberger Str. 130
71034 Böblingen, Germany
Warranty
This Agilent Technologies instrument prod-
uct is warranted against defects in material
and workmanship for a period of one year
from date of shipment. During the warranty
period, Agilent will, at its option, either
repair or replace products that prove to be
defective.
For warranty service or repair, this product
must be returned to a service facility desig-
nated by Agilent. Buyer shall prepay ship-
ping charges to Agilent and Agilent shall
pay shipping charges to return the product
to Buyer. However, Buyer shall pay all ship-
ping charges, duties, and taxes for products
returned to Agilent from another country.
Agilent warrants that its software and firm-
ware designated by Agilent for use with an
instrument will execute its programming
instructions when properly installed on that
instrument. Agilent does not warrant that
the operation of the instrument, software,
or firmware will be uninterrupted or error
free.
Limitation of Warranty
The foregoing warranty shall not apply to
defects resulting from improper or inade-
quate maintenance by Buyer, Buyer-sup-
plied software or interfacing, unauthorized
modification or misuse, operation outside
of the environmental specifications for the
product, or improper site preparation or
maintenance.
No other warranty is expressed or implied.
Agilent Technologies specifically disclaims
the implied warranties of Merchantability
and Fitness for a Particular Purpose.
Technology Licenses
The hardware and/or software described in
this document are furnished under a
license and may be used or copied only in
accordance with the terms of such license.
Restricted Rights Legend
If software is for use in the performance of
a U.S. Government prime contract or sub-
contract, Software is delivered and
licensed as “Commercial computer soft-
ware” as defined in DFAR 252.227-7014
(June 1995), or as a “commercial item” as
defined in FAR 2.101(a) or as “Restricted
computer software” as defined in FAR
52.227-19 (June 1987) or any equivalent
agency regulation or contract clause. Use,
duplication or disclosure of Software is
subject to Agilent Technologies’ standard
commercial license terms, and non-DOD
Departments and Agencies of the U.S. Gov-
ernment will receive no greater than
Restricted Rights as defined in FAR
52.227-19(c)(1-2) (June 1987). U.S. Govern-
ment users will receive no greater than
Limited Rights as defined in FAR 52.227-14
(June 1987) or DFAR 252.227-7015 (b)(2)
(November 1995), as applicable in any
technical data.
Exclusive Remedies
The remedies provided herein are Buyer's
sole and exclusive remedies. Agilent Tech-
nologies shall not be liable for any direct,
indirect, special, incidental, or consequen-
tial damages whether based on contract,
tort, or any other legal theory.
Assistance
Product maintenance agreements and
other customer assistance agreements are
available for Agilent Technologies prod-
ucts. For any assistance contact your near-
est Agilent Technologies Sales and Service
Office.
Certification
Agilent Technologies Inc. certifies that this
product met its published specifications at
the time of shipment from the factory.
Agilent Technologies further certifies that
its calibration measurements are traceable
to the United States National Institute of
Standards and Technology, NIST (formerly
the United States National Bureau of Stan-
dards, NBS) to the extent allowed by the
Institutes’s calibration facility, and to the
calibration facilities of other International
Standards Organization members.
ISO 9001 Certification
Produced to ISO 9001 international quality
system standard as part of our objective of
continually increasing customer satisfac-
tion through improved process control.
Safety Notices
CAUTION
A CAUTION notice calls attention
to an operating procedure, practice,
or the like that, if not correctly per-
formed or adhered to, could result
in damage to the product or loss of
important data. Do not proceed
beyond a CAUTION notice until the
indicated conditions are fully
understood and met.
WARNING
A WARNING notice calls attention
to an operating procedure, prac-
tice, or the like that, if not cor-
rectly performed or adhered to,
could result in personal injury or
death. Do not proceed beyond a
WARNING notice until the indi-
cated conditions are fully under-
stood and met.