Specifications

Getting Started 1
Multiport Power Meter Getting Started 21
USB Interface
The power meter is a USB device, with a mini-USB connector.
Powering Up the Instrument
When you switch on the power meter, the LEDs on the front
panel show the various stages of booting.
Front Panel Indicators
During operation, you may notice the following LED indicators:
Connecting to the Instrument
When you are first connecting the instrument, we recommend
you use the Agilent Connection Expert included with the
Agilent I/O libraries (available on the CD supplied with the
instrument, or from www.agilent.com).
NOTE
Before connecting the instrument over USB, install the Agilent I/O
Libraries Suite, which is included on a CD with the instrument.
Standby Power On FPGAs loaded
Analog
Board 1 loaded
Analog
Board 2 loaded
Error
Yellow
Error
Green
Error
Green
Error
Green
Error
Stat
Yellow
Stat
Yellow
Stat
Green
Stat
Green
Stat
LAN
Yellow
LAN
Yellow
LAN
Yellow
LAN
Green
LAN
Yellow
Pwr
Green
Pwr
Green
Pwr
Green
Pwr
Green
Pwr
Hardware defect
Red
Error
LAN, USB or GPIB
communication Zeroing
Green blink
Stat
Yellow
Stat