User`s guide

Accessories Agilent 81600B Family Tunable Laser Source Modules and Options
26 Agilent 81600B Tunable Laser Source Family, Fourth Edition
Agilent 81600B Family Tunable
Laser Source Modules and
Options
Figure 6 Agilent 8164A/B mainframes, Agilent 81600B Family Tunable Laser Source
modules, and Options
81600B Tunable Laser Source family
Connector Interfaces
for straight connectors
2 ea required for 81600B
#200,160,150,140.
1 ea required for 81600B
#142, 132.
81000FI FC/PC
81000HI E-2000/PC
81000KI SC/PC
81000LI LC/PC
81000MI MU/PC
81000SI DIN 47256/PC
81000VI ST/PC
Connector Interface
for angled connectors
2 ea required for 81600B
#200,160,150,140.
1 ea required for 81600B
#142, 132.
81000FI FC/APC key width 2.2mm
81000NI FC/APC key width 2.0mm
81000HI E-2000/APC
81000KI SC/APC
81000LI LC/APC
81000MI MU/APC
81000SI DIN 47256/APC
Tunable Laser Sources
Low SSE modules
81600B #200:
1440 nm – 1640 nm
81600B #160:
1495 nm - 1640 nm
81600B #150:
1450 nm - 1590 nm
81600B #140:
1370 nm - 1495 nm
81600B #130:
1260 nm - 1375 nm
Tunable Laser Sources
High Power modules
81600B #142:
1370 nm - 1495 nm, + 8.5 dBm
81600B #132:
1260 nm - 1375 nm, + 9 dBm
81600B-071
PMF Straight
contact connector
Tunable Laser
Sources
Outputs:
High Power
only
Note: 81600B - 072 is highly recommended over 81600B - 071 to reduce front-panel reflections, which will greatly reduce interference noise and
spectral ripple in the test setup.
Connector Interfaces
for straight
connectors
Connector Interfaces
for angled connectors
For Laser Safety information see page 14
OPTIONAL
MANDATORY AND MUTUALLY EXCLUSIVE
81600B-072
PMF Angled
contact connector
81600B-003
with built-in
attenuator
(81600B #142 only)
Tunable Laser
Sources
Outputs:
Low SSE and
High Power