User`s guide

 Use Interactive IO to Communicate with Instruments. After you have configured
remote GPIB and/or remote serial interfaces, you can use Interactive IO to establish
communication between your PC and your GPIB or RS-232 instruments. To run
Interactive IO for an IEEE-488.2 compliant instrument:
1. Click the instrument's icon in the Connection Expert window.
2. Click Send Commands To This Instrument to display Interactive IO.
3. With the default command, *IDN?, displayed in the text box, click the Send &
Read button.
4. The instrument identification string should appear.
5. Repeat Steps 1 - 4 for the next instrument.
 Program Instruments (Optional). After communication has been established, you
can program your GPIB and RS-232 instruments using VISA, VISA COM, or SICL.
See E5810A Documentation/Support on the back of this poster for applicable
documentation.
8 Verify Communication From PC