User`s guide

 Display the E5810A Welcome Page. To display the E5810A Welcome page, on
your web browser type 'http://<hostname>', where <hostname> is the Hostname of
the E5810A OR type 'http://<IP address>', where <IP address> is the current E5810A
IP address (such as 169.254.58.10) shown on the E5810A display. Then, press Enter.
NOTE
If the Welcome page does not display correctly, you may need to change your web
browser settings. See Configuring Your Web Browser on the back of this poster for
details.
 View/Modify Current Configuration (Optional). To view current configuration
settings (and change settings as desired), click the View and Modify Configuration
icon and enter the password (the default password is E5810) to display the Current
Configuration of the E5810 LAN/GPIB Gateway page. Click the Modify
Configuration button to enable you to change settings. After making changes, click
Save and then Reboot E5810 to make changes effective.
Click this icon
to View and
Modify
Configuration
Click this icon
to Find and
Query
Instruments
Current
E5810A
Settings
on Display
3 Configure the E5810A