User`s guide

102
Installing I/O Software
Pre-Installation Checks
Pre-Installation Checks
Before you install I/O software on your PC, verify that your system meets the
minimum hardware and software requirements to install and use the Agilent
IO Libraries for the USB, LAN, or GPIB interface. Adding additional RAM
may improve system performance. For example, this table shows minimum
hardware and software requirements to install the software contained on the
Agilent IntuiLink for the 33220A Waveform Generator CD.
Hardware Minimum Requirements
PC Operation/Memory Pentium 200 MHz operation and 64 MBytes RAM
Free Disk Space 80 MBytes
Ethernet Connections (LAN) 10BASE-T or 100BASE-TX compliant
PCI Bus Slot (GPIB) At least one PCI Bus Slot (to install Agilent 82350B)
ISA Bus Slot (GPIB) At least one ISA Bus Slot (to install Agilent 82341A)
USB Port (USB) At least one USB Port
Software Minimum Requirements
Operating System Windows 98/Me/NT 4.0 (SP5 or greater)/2000/XP (LAN/GPIB)
Windows 98 (SE)/Me/2000/XP (USB)
Web Browser (Optional) Internet Explorer 5.0 or higher. (Internet Explorer 5.5 or higher is
recommended.)
Agilent IO Libraries
Installation Sizes
- Core Installation (LAN only)
- Run-Time Installation (adds hardware drivers)
- Full Installation (without manuals)
- Full Installation (with manuals)
- Add Adobe Acrobat Reader (version 5.05)
5 Mb
9 Mb
14 Mb
34 Mb
11 Mb (addl)