User's Manual

Chapter 1 333
GPIB Command Dictionary
SANalyzer subsystem
:TGENerator:SWEep <string>
:TGENerator:SWEep?
These commands set/query the sweep type of the tracking generator. To
select the tracking generator use the SAN:RFG ‘Track’ command.
‘Norm’ specifies a sweep from low to high frequency. ‘Invert’ specifies a
sweep from high to low frequency.
Syntax
SAN:TGEN:SWE ‘Norm’
‘Invert’
SAN:TGEN:SWE?
Screen/field equivalent
SAN:TGEN:SWE controls the Norm/Invert subfield of the Port/Sweep
field on the RF Gen menu of the SPEC ANL screen. The Track/Fixed
field must be set to Track.