User's Manual

Introduction
The commands in the Measure Subsystem are used to make automatic
parametric measurements on oscilloscope waveforms. Except for
SOURce, no commands in the MEASure subsystem set values. The
MEASure subsystem commands are:
• ALL • SOURce
• FALLtime • VAMPlitude
• FREQuency • VBASe
• NWIDth • VMAX
• OVERshoot • VMIN
• PERiod • VPP
• PREShoot • VTOP
• PWIDth
• RISetime
This chapter applies only to the oscilloscope option.
33-2